Oki C830 Maintenance Manual

44015503TH Rev. 1
148 /
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.5 Manual density adjustment setting
C830 is shipped with the auto density adjustment mode enabled. When the mode is disabled
by a user, the printer may print density out of adjustment while being used. Manually perform
density adjustment setting when the printer prints an improper density.
Note! T
he setting must be performed with the printer in a static state. Do not
perform it while the printer warms up.
(
1) Press the MENU up-arrow (
) or MENU down-arrow ( ) button more than one
time. Press the ENTER button when Calibration appears.
(2) Press the MENU up-arrow (
) or MENU down-arrow ( ) button to select Adjust
Density Execute. Press the ENTER button.
(3) Press the ENTER button.
Auto density adjustment starts, the operator panel display providing a message stating
that density is being adjusted.

Oki C830 Specifications

General

Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Duplex Printing	Yes
Internal Memory	256 MB
Maximum Internal Memory	768 MB
USB 2.0 Ports Quantity	1
Print Technology	Laser
Connectivity	Ethernet
Standard Output Capacity	150 sheets
Maximum Output Capacity	150 sheets
Standard Printer Languages	PostScript 3
Operating System Compatibility	Windows, Mac