Oki C834 Advanced Manual

- 160 -
6. Utility Software
You can set so that you can maintain the connection with the original printer even after the IP
address of the device changes.
• You must have the administrator rights.
• The IP address may change if DHCP dynamically assigns IP addresses or the network administrator manually
changes the IP address of the printer.
1
Start OKI LPR Utility.
2
Select [Setup] from the [Option] menu.
3
Select the [Auto Reconnect] check box, and then click [OK].
1
Start OKI LPR Utility.
2
Select a device.
3
Select [Confirm Connections] from the [Remote Print] menu.
4
Click [Details].
5
Enter the web port number in [Port Numbers].
6
Click [OK].
Following the IP Address of the Registered Device
Automatically
Setting the Web Port Number of the Machine

Oki C834 Specifications

General

Print Technology	LED
Maximum Paper Size	A3
Processor	800 MHz
Operating Systems Supported	Windows, Mac OS, Linux
Dimensions	449 x 552 x 360 mm
Weight	37 kg
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
Memory	1 GB
Connectivity	USB, Ethernet
Interface	USB, Ethernet
Media Size	A6 to A3