Oki C834 Advanced Manual

- 93 -
5. Management / Setting the Printer
If the power supply is cut off when the machine is turned on, the machine does not
automatically turn on after the power is restored.
If you want to set the machine automatically resumes after the power supply is restored,
select [Boot Menu] and set [After AC power supply fails] to [Always On] or [Last State].
The operation that uses an uninterruptible power supply (UPS) or inverter is not guaranteed.
Do not use an uninterruptible power supply (UPS) or inverter.
Boot Menu
By the factory default, when the power supply is cut off, the machine works as follows.
If a Power Failure Occurs
Machine's Status Operation
During a reception The reception stops halfway.
Printing a report Printing stops halfway.
When the power is restored, start the print job again.
Standby You cannot start printing.

Oki C834 Specifications

General

Print Technology	LED
Maximum Paper Size	A3
Processor	800 MHz
Operating Systems Supported	Windows, Mac OS, Linux
Dimensions	449 x 552 x 360 mm
Weight	37 kg
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
Memory	1 GB
Connectivity	USB, Ethernet
Interface	USB, Ethernet
Media Size	A6 to A3