- 64 -
4. Useful Print Functions
• If setting details are not displayed in the print dialog, click [Show Details] at the bottom of the dialog.
When the specified tray runs out of paper, the machine can continue to print from another
tray if paper of the same paper size and weight is loaded in the paper cassettes (Tray 1 to 5)
and the MP tray.
To use this function, enable the auto tray switching function on the operator panel first. Then,
set the auto tray switching function with the printer driver.
• For the paper settings of each tray used for the auto tray switch function, set the same values to the machine and
printer driver.
Supported Paper (User's Manual)
• Setting Trays for the Auto Tray Switching
In the default settings, the [Tray Usage] is [Do Not Use]. When at default settings, the MP
tray is not supported by the auto tray switching function.
Set the MP tray as a target of the auto tray selection.
1
Press the «Fn» key.
• When a printer is in the power saving mode, press the «POWER SAVE» button to restore from the mode.
2
Press the «9» and «5» on the numeric keypad and then press the «ENTER»
button.
3
Press the scroll button to select [Normal Tray] and then press the
«ENTER» button.
• Trays switch in accordance with the [Tray Sequence] setting.
4
Press the «ON LINE» button to exit the menu mode.
• For Windows PCL Printer Driver
1
Open the file to print.
Switching to Another Paper Feed Tray Automatically When a
Tray Runs Out Of Paper
To Next Page
Loading...
Need help?
General
