Oki C910 Setup Guide

14 - English
4 Connect the ferrite core end of the Ethernet
cable to the printer.
5 Connect the other end of the Ethernet cable
to a suitable hub.
Print the Network Information
Page
The Network Information page provides the
information you need to install software and to
set up the network.
1 Make sure the printer is turned on.
2 Press Menu on the control panel.
3 Press the down arrow to select Print
Information. Press Enter.
4 Press the down arrow to select Network. Press
Enter.
5 Execute appears on the display. Press Enter.
Install the Driver(s) and Utilities
1 Make sure the printer is off.
2 Insert the CD supplied with the printer in the
CD-ROM drive. The CD will autorun. (If it
doesn’t, go to the CD’s main directory and
double click [setup.exe].)
3 Select your language.
4 Accept the license agreement.
5 Click [Driver Setup].
6 Click [Install Driver].
7 Select network printer. Click [Next].
8 When prompted, select the printer
emulation(s) you wish to install (PS, PCL).
9 Follow the on-screen instructions.
Install the User’s Guide
If you wish to install the User’s Guide pdf on PCs
connected to the printer:
1 Insert the CD supplied with the printer in the
PC’s CD-ROM drive, and wait for it to
AutoRun. (If it doesn’t, go to the CD’s main
directory and double click [setup.exe].)
2 Select your language and accept the license
agreement.
3 Click [User Guides].
4 Click [Install User Guide] and follow the on-
screen instructions.

Oki C910 Specifications

General

Brand	Oki
Model	C910
Category	Printer
Language	English