15 - English
Windows USB Installation
Install the Driver(s) and Utilities
1 Make sure the printer is off.
2 Insert the CD supplied with the printer in the
CD-ROM drive. The CD will AutoRun. (If it
doesn’t, Click Start > Run and browse to the
CD’s main directory and double click
[setup.exe], then click [OK].)
3 Select your language.
4 Accept the license agreement.
5 Click [Driver Setup].
6 Click [Install Driver].
7 Select local printer.
8 Select the USB port. Click [Next]
9 Select [OKI C910], then select the
emulation(s) to install (PCL, PS).
10 Follow the on-screen instructions.
11 When prompted, connect a USB cable to the
printer (1) and the PC (2).
12 Turn the printer on.
Install the User’s Guide
If you also wish to install the User’s Guide pdf:
1 With the CD still in the CD-ROM drive, click
[User Guides].
2 Click [Install User Guide] and follow the on-
screen instructions.
Windows Parallel Interface
Installation
1 Turn off the printer and the computer.
2 Connect a parallel cable between the printer
and the computer.
3 Turn the printer and computer on.
To Next Page
Loading...
Need help?
General
