Oki C911 - Page 108

沖データ企業秘密・OkiDataCONFIDENTIAL
45530603TX −108／130
Priority Status Message Ready
LED
Atten
LED
Function Status level
Error code
Status code
unit is specified by the driver. When the driver specifies a unit, the unit is used for display.
301 1
2
3
Change %MEDIA_SIZE% %MEDIA_TYPE%
in %TRAY%
Press OK Button
Please see HELP for details
Off Blink The media type in the tray and the print data do not match. Load mmmmmmm/pppppp
paper in tttttt tray (It takes a while until the status disappears after you have closed the tray
and the lever lifted.) (tttttt：TrayName,mmmmmm:PaperName.pppppp:MediaTypeName)
Error 661 : Tray1
Error 662 : Tray2
Error 663 : Tray3
 Error 664 : Tray4
 Error 665 : Tray5
Paper size displays in Custom mode: "<width>x<length> <unit>"
ex.) 210x297 mm
8.5x11.0 inch
The unit of paper size in Custom: The unit specified for MPTray (menu setting) is used if no
unit is specified by the driver. When the driver specifies a unit, the unit is used for display.
As a user pressed ONLINE key, the printer could ignore this error at the just printing job.
If Media_Size has both portrait and landscape, %MEDIA_SIZE% displays icon which
indicate paper orientation after Paper Size.
Error
661
662
663
664
665
482yy
483yy
485yy
486yy
487yy
302 1
2
3
Change %MEDIA_SIZE% %MEDIA_TYPE% in
MPTray
Press OK Button
Please see HELP for details
Off Blink The media type in the tray and the print data do not match. Load paper in tray (It takes a
while until the status disappears after you have closed the tray and the lever lifted.)
(%TRAY%：
TrayName,%MEDIA_SIZE%:PaperName.%MEDIA_TYPE%:MediaTypeName)
Error 660 : MPTray
Paper size displays in Custom mode: "<width>x<length> <unit>"
ex.) 210x297 mm
8.5x11.0 inch
The unit of paper size in Custom: The unit specified for MPTray (menu setting) is used if no
unit is specified by the driver. When the driver specifies a unit, the unit is used for display.
A user needs to press ONLINE key after changing the paper.
If Media_Size has both portrait and landscape, %MEDIA_SIZE% displays icon which
indicate paper orientation after Paper Size.
Error
660
480yy
303 1
2
3
Please change %TRAY% paper.
Ensure %MEDIA_SIZE%, %MEDIA_TYPE% is
installed. If printing fails, cancel and re-adjust tray
settings.
Pressing OK will print using current paper tray
settings.
Please see HELP for details
Off Blink The size of paper or media type in the tray does not match the print data.
Load paper in tray
(It takes a while until the status disappears after you have closed the tray and the lever
lifted.)
Error 461 : Tray1
Error 462 : Tray2
Error 463 : Tray3
Error 464 : Tray4
Error 465 : Tray5
The paper size displaying form of the custom mode is the same as above.
Paper size displays in Custom mode: "<width>x<length> <unit>"
ex.) 210x297 mm
8.5x11.0 inch
As a user pressed ONLINE key, the printer could ignore this error at the just printing job.
If Media_Size has both portrait and landscape, %MEDIA_SIZE% displays icon which
Error
461
462
463
464
465
482yy
483yy
485yy
486yy
487yy