Oki C9650dn Network And Configuration Guide

Introduction > 12
C ONFIGURATION METHODS
You can configure the print server by using one of the following
methods:
UTILITY FEATURES SYSTEM
REQUIREMENTS
Quick Setup
(see page 14)
Configure the print server
easily and simply without
installing any software
packages into your system.
You can set the following:
• Enable/disable TCP/IP,
EtherTalk, NetBEUI
protocols.
• Set IP address, Subnet
Mask and Gateway for
TCP/IP manually or by
using DHCP.
• Zone name and Port
name for EtherTalk.
Windows*
•Vista
•XP
•2000
* with TCP/IP protocol
or IPX/SPX protocol
installed.
AdminManager Configure the print server in
detail.
Web Browser Configure the print server
and printer by using a Web
browser.
Microsoft Internet
Explorer or similar.
Operating system that
supports the Web
browser.
TELNET Configure the print server
using TELNET.
Third-party vendor
developed TELNET
client package.
A TELNET Application
is standard in Windows.
SNMP The printer and network
card can be controlled
using a third-party vendor
developed SNMP
application.
Third-party vendor
developed SNMP
application.

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg