Oki C9650dn Network And Configuration Guide

Using the adminmanager quick setup > 14
U SING THE ADMINMANAGER QUICK SETUP
I NTRODUCTION
The AdminManager Quick Setup utility allows you to configure
the print server easily and simply without installing any software
packages.
You can configure the following:
> Enable/disable TCP/IP, EtherTalk, NetBEUI protocols.
> Set IP address, Subnet Mask and Gateway for TCP/IP
manually or by using DHCP.
> Set NetWare mode and create Queue/Print Server/Printer
objects.
> Zone name and Port name for EtherTalk.
NOTE
> This utility can only be used on a PC that can be
connected to the network with TCP/IP or IPX/SPX.
> This utility must be used on a PC that is located in the
same segment as the printer.

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg