Oki C9650dn Network And Configuration Guide

Appendix: the printer menu > 100
P RINTER M ENU : F UNCTIONS L IST
A DMIN S ETUP
Password
N ETWORK S ETUP
ITEM VALUE DESCRIPTION
Enter
password
nnnn Enter a password to enter the Administrator
menu.
The default password is 0000 (four zeroes).
ITEM VALUE DESCRIPTION
TCP/IP Enable
Disable
Enables/Disables the TCP/IP protocol.
IP Version IP v4
IP v4+v6
IP v6
Set up the IP Version.
Display condition: TCP/IP protocol must be
enabled.
NetBEUI Enable
Disable
Enables/Disables the NETBEUI protocol.
NetWare Enable
Disable
Enables/Disables the NetWare protocol.
EtherTalk Enable
Disable
Enables/Disables the EtherTalk protocol.
Frame Type Auto
802.2
802.3
Ethernet II
SNAP
Sets the frame type (NetWare).
IP Address Set Auto
Manual
Sets IP address setup method (TCP/IP).
IP Address xxx.xxx.xxx.x
xx
Sets the IP address (TCP/IP).
Subnet Mask xxx.xxx.xxx.x
xx
Sets the Subnet Mask (TCP/IP).
Gateway
Address
xxx.xxx.xxx.x
xx
Sets the Gateway (default router) address
(TCP/IP).

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg