Oki C9650dn Network And Configuration Guide

Appendix: the printer menu > 101
Print Setup
Web Enable
Disable
Enables/Disables the Web/IPP (TCP/IP).
Telnet Enable
Disable
Enables/Disables Telnet (TCP/IP).
FTP Enable
Disable
Enables/Disables FTP (TCP/IP).
SNMP Enable
Disable
Enables/Disables SNMP of FTP (TCP/IP or
NetWare).
Network Scale Normal
Small
Normal: Can work effectively even when
connected to a HUB that has a spanning tree
feature. However, printer start up time gets
longer when computers are connected to two
or three small LANs.
Small: Computers can cover from two or three
small LANs to a large LAN, but it may not work
effectively when it is connected to a HUB with a
spanning tree feature.
Hub Link
Setting
Auto
Negotiate
1000Base-T
Full
100Base-TX
Full
100Base-TX
Half
10Base-T Full
10Base-T Half
Sets the hub linking method.
Factory
Defaults?
Execute Specifies whether to initialize the network
menu.
ITEM VALUE DESCRIPTION
ITEM VALUE DESCRIPTION
Personality Auto
PostScript
PCL
IBM PPR
EPSON FX
Selects a printer language.
Copies 1 ~ 999 Sets number of copies. Disabled for
local print, except for demo data.
Duplex ON
OFF
Specifies duplex printing.

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg