Oki C9650dn Network And Configuration Guide

Appendix: the printer menu > 99
10. Press the Up-arrow or Down-arrow buttons repeatedly
until FTP is highlighted.
11. Use the Up-arrow or Down-arrow buttons to highlight
Enable.
12. Press the Enter button to engage the setting.
An asterisk (*) appears next to the new setting.
13. Press the Online button to exit menu mode and return to
the Ready to print status.
M AKING C HANGES IN THE B OOT M ENU
1. Turn the printer OFF.
2. Press and hold the Enter button while turning the printer
back on.
3. Use the Up-arrow or Down-arrow buttons to scroll to
an entry and the Enter button to select the entry, until
you reach the item you wish to change.
4. Use the Up-arrow or Down-arrow buttons to scroll
down to the setting you wish to engage, then press the
Enter button.
An asterisk (*) appears next to the new setting.
5. Press the Online button to exit menu mode and return to
the Ready to print status.
NOTE
Keep pressing the Enter button until
INITIALISING
appears on the display.

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg