Oki C9650dn Network And Configuration Guide

Appendix: the printer menu > 98
P RINTER M ENU : M AKING C HANGES IN THE M ENU
M AKING C HANGES IN THE F UNCTION M ENU
1. Ensure that the LCD panel indicates that the printer is
ready to print.
2. Press the Enter button to switch to the Menu mode.
3. Press the Up-arrow or Down-arrow buttons to scroll
down to the Function you wish to change, then press the
Enter button.
4. Continue to use the Up-arrow, Down-arrow and Enter
buttons in a similar manner to drill down to the item you
wish to change.
5. Use the Up-arrow or Down-arrow buttons to scroll
down to the setting you wish to engage, then press Enter.
An asterisk (*) appears next to the new setting.
6. Press the Online button to exit menu mode and return to
the Ready to print status.
Example: Enabling FTP
1. Ensure that the LCD panel indicates that the printer is
ready to print.
2. Press the Enter button to switch to the Menu mode.
3. With Configuration highlighted, press the Enter button
to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly
until Admin Setup is highlighted.
5. Press the Enter button to select this item.
6. Press the Up-arrow or Down-arrow buttons to enter the
first digit of the password, then press the Enter button.
7. Repeat the previous step for each digit of the password.
8. Press the Enter button to go into the Admin Setup
menu.
9. With Network Setup highlighted, press the Enter
button.

Oki C9650dn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	85 sec
resolution	1200 x 600 dpi

Memory

standard RAM	512 MB
maximum RAM	1, 024 MB
flash memory	4 MB
hard disk drive	40 GB

Power

power consumption operating typical	780W
power consumption peak	<1500W
power consumption standby	200W
power consumption power save	33W

Weight and Dimensions

size	23.6" x 24.6" x 18.5"
weight	167.5 lb
weight with consumables	76.0 kg