Using adminmanager standard setup > 44
NetWare Tab (Environmental Setup)
ITEM COMMENTS
Use NetWare
Protocol
Enable/disable NetWare protocol. The default is
enabled. If disabled, the search will not be carried out
using NetWare.
Auto Search If Auto Search is selected (the default),
AdminManager will search all networks that it can
detect.
Set Network
Number
Set network addresses that are used to search Oki
network interface cards via NetWare protocol. If there
any many NetWare file servers on your network, specify
the network address to which the network card belongs.
Add Click to add the network number you have entered to
the list box.
Delete Select a network number in the list box, then click
Delete to remove it.