5
5-3 General Setup options
General Setup options
You can specify Fiery system settings that affect all users, such as the name of the Fiery,
system date and time, passwords, and Job Log printing.
Server Name. —Specify a name for the Fiery. This is the name that appears in the Chooser on an
AppleTalk network.
NOTE: Do not use the device name (C9800) as the server name. If you have more than
one Fiery, do not assign them the same name.
Date and Time. —Specify the system date and time, which are recorded on the Job Log.
Enable Printed Queue. —Specify whether to enable the Printed queue, a storage location on the Fiery hard
disk for recently printed jobs. You can reprint jobs from the Printed queue without
resending them to the Fiery. If the Printed queue is not enabled, jobs are deleted from
the Fiery disk immediately after they are printed.
Jobs Saved in Printed Queue. —Specify the number of jobs to be stored in the Printed queue. Jobs in the Printed
queue take up space on the Fiery hard disk.
To Next Page
Loading...
Need help?
General
