7
7-10 Administering the Fiery
Shutting down, rebooting, and restarting the C9800
Generally, you can leave the printer running all the time. This section describes how to
reboot, shut down, and restart the system when
necessary.
Shutting down and rebooting the printer
You may need to shut down the printer for service, or reboot the entire system. When
you do so, fonts that have been downloaded to the hard disk are not deleted. Print jobs
in the Hold queue, the Printed queue, and jobs that have been processed but not
printed are not deleted; they will be available for printing when you restart the printer.
TO SHUT DOWN THE PRINTER
1. With the printer in the READY state, press the or keys to select the Shutdown
Menu, then press the ENTER key to select it.
2. Press the
or keys to select Shutdown, then press the ENTER key to shut down
the entire system.
TO REBOOT THE FIERY PRINTER
1. With the printer in the READY state, press the or keys to select the Shutdown
Menu, then press the ENTER key to select it.
2. Press the
or keys to select Reboot, then press the ENTER key to stop the Fiery
and reboot the operating system.
Restarting the Fiery
Restarting the Fiery resets the Fiery system software, but does not reboot the entire
system. Network access to the Fiery is temporarily interrupted and all currently
processing jobs are aborted.
TO RESTART THE FIERY PRINTER
1. With the printer in the READY state, press the or keys to select the Shutdown
Menu, then press the ENTER key to select it.
To Next Page
Loading...
Need help?
General
