6
6-2 Configuring Fiery WebTools
TO ACCESS WEBTOOLS
1. Start your Internet browser.
2. Enter the IP address or DNS name of the Fiery.
3. Press Enter.
The Fiery home page appears.
4. Click the name of a particular WebTool.
5. Click Configure to enable specific WebTools for users.
Setting up Fiery WebTools
In order for network users to access and use Fiery WebTools, you must set certain Fiery
options in Network Setup and Printer Setup. You also must prepare each user’s
workstation to communicate with the Fiery over the Internet or intranet.
For more information on Network Setup, see Chapter 2.
TO SET UP FIERY WEBTOOLS ON THE FIERY
1. Set Enable Ethernet to Yes in Network Setup > Port Setup > Ethernet Port Setup.
2. Set Enable TCP/IP for Ethernet to Yes in Network Setup > TCP/IP Ethernet Setup.
3. Set Enable Web Services to Yes in Network Setup > Network Service
Setup > Web Services Setup.
4. Exit Network Setup. Choose OK to Save Changes.
To Next Page
Loading...
Need help?
General
