5
5-30 Setting up the Fiery from a Windows Computer
PS (PostScript) Setup
Convert Paper Sizes. Specify whether to convert paper sizes in documents automatically to the default paper
sizes specified. For example, if you select Letter/11
x17->A4/A3, a letter size document
is automatically printed on A4 paper.
NOTE: This option works in conjunction with the Default Paper Sizes option. For
example, if Convert Paper Sizes is set to Letter/11
x17->A4/A3, and Default Paper Sizes
is set to US, then jobs are printed A4/A3 size. This also includes Fiery system pages
such as the Start Page, Test Page, and Job Log.
Default Paper Sizes. —Specify whether to print on US paper sizes (for example, Letter, Legal, Tabloid), or
Metric paper sizes (for example, A4 or A3) by default. When no paper size is defined
within a PostScript file, jobs are printed on Letter-size paper if you select US or A4
paper if you select Metric.
Print Cover Page. —Specify whether to insert an identification sheet between print jobs.
Print to PS Error. —Specify whether to print a error page if an error occurs during PostScript printing.
When you choose No, errors are ignored
Allow Courier Substitution. —Specify whether to substitute Courier for unavailable fonts. When you choose No,
jobs requiring fonts unavailable on the Fiery hard disk generate a PostScript error and
do not print. This setting does not apply to PDF files; font substitution occurs
automatically for PDF files.
Print Master. —Specify whether to generate a printout when creating a master. When you choose
No, a master is created as a RIP and Hold job but is not printed.
Scale to Fit. —Specify whether to print data formatted for one size page onto a different size page,
without modifying the print data.
To Next Page
Loading...
Need help?
General
