1
1-3 Stages of installation on the network
Summary of Fiery network installation
UNIX Mac OS Windows
At each workstation that will print to the Fiery:
• Install the appropriate printer files and connect
to one or more queues.
• For computers that will use them, install Fiery
utilities and an Internet browser.
• Verify the Fiery in the list of printers and run a
test print.
Fiery available on the network
Network server
Fiery
Fiery
Prepare a network node. Connect the Fiery to the
network. If you use a computer running Command
WorkStation software, connect it to
the network.
Configure UNIX, Windows NT 4.0/2000/Server
2003, and IPX (Novell) servers to specify Fiery
print queues and Fiery users.
No special configuration of AppleShare servers
is required.
On the printer Control Panel, configure, at a
minimum, the Server Setup, Network Setup, and
Printer Setup.
SERVER CONFIGURATION
CONNECTION
CLIENT SETUP
FIERY SETUP
To Next Page
Loading...
Need help?
General
