4
4-28 Performing Setup from the Control Panel
NetWare Print Server
List of print servers on selected file server
Choose the name of the print server to use. This is the print server that will route print
jobs to the Fiery from computers on IPX networks.
If you do not want to make any changes, press the Menu button to return to the Bind-
ery Setup menu.
Network Setup
Service Setup
PServer Setup
Bindery Setup
View Server List
Supported servers
This option allows you to view the list of file servers currently connected to the Fiery—
that is, servers you have added in Bindery Setup. You are notified if there are none.
When you press Enter, you return to the Bindery Setup menu.
Network Setup
Service Setup
PServer Setup
Bindery Setup
Edit Connection
On each connected NetWare file server, you have defined a print server to handle Fiery
print jobs. Choose this option to change the print server assigned to the Fiery.
Choose File Server
File server name
From the list of connected NetWare file servers, choose the file server whose print
server you want to change.
To Next Page
Loading...
Need help?
General
