4
4-34 Performing Setup from the Control Panel
Outgoing Server
[127.0.0.1]
Enter the IP address of the server on your network that handles outgoing e-mail.
Incoming Server
[127.0.0.1]
Enter the IP address of the server on your network that handles incoming e-mail.
Server Type
POP3/IMAP [POP3]
Choose the type of mail server.
Fiery E-mail User Name
Enter the user name of the e-mail account. This is typically the part of the e-mail
address that precedes the @ symbol. For example, in the address
pat@test.com, the
user name is
pat.
Fiery E-mail Domain Name
Enter the name of the domain in which the user has an account. This is typically the
part of the e-mail address that follows the @ symbol. For example, in the address
pat@test.com, the domain name is test.com.
NOTE: The domain name can contain no more than 20 characters.
Account Name
Enter the account name. This is the internal name your network recognizes, which is
not necessarily the same as User Name.
Password
Enter the password for the e-mail account.
Administrator E-mail User Name
Enter the administrator name of the administrator e-mail account. This is typically the
part of the e-mail address that precedes the @ symbol. For example, in the address
pat@test.com, the administrator e-mail user name is pat.
To Next Page
Loading...
Need help?
General
