10
Precautions when handling printouts
z
Do not touch the printed surface of the media before the ink dries, or especially 24 hours after printing.
Handle the printout by the margins.
z
Do not scratch the printout to avoid lost or transfer of colors. To avoid color transfer, do not stack printed
media on one another with their printed surface facing in contact.
z
Do not put printed media on a printout from a copier or laser printer. The printouts’ ink or toner may make
the two printouts to stick together.
z
Note that ink on a printed surface may come o if the surface is rubbed hard or scratched.
z
The printed image may bleed or disappear if scratched or left while being wet.
Other precautions
z
Media loses its color and quality with age. Check the media condition and select the media in the best
condition.
z
Cut the media carefully, as paper dust may make irregular surfaces.
z
When adhesive-backed media is applied, some adhesive agent may be left on the platen, which may
cause a media jam. So clean the agent completely with a soft cloth moistened with the neutral detergent.
Carriage operation during printing
When printing in reflecting sheet mode, the carriage operates the same as when 48-inch media is used even if
narrower media is used in order to maintain the drying performance.
To Next Page
Loading...
