Oki ColorPainter M-64S - Basic Specifications

82
Appendix
Basic specications
Item
Specication / Function
IP-6620 (reective sheet mode on)
Print method
Piezo-type color inkjet printing
Resolution
(main scanning direction) × (subscanning direction)
540 dpi × 360 dpi × DDP
Print speed
19.4 m
2
/h for 48-inch width media at 6-pass bidirectional and high density
(STANDARD mode)
Media supply/take-up direction
Rear: Supply side, Front: Take-up side
Media type
Reective sheeting
Media width
48 inches (1219 mm), 36 inches (914 mm)
Ink cartridge
Normal solvent ink (7 colors)
(black, cyan, magenta, yellow, light cyan, light magenta, gray)
1500 ml for each color
Interface
USB 2.0
Noise
Standby: 50 dB (A) or less
Operating: 60 dB (A) or less (continuous sound)
excluding supply/take-up motor noise and ink lling noise
Caloric power
M64s printer: 10368 kJ/h
External dryer system: 12204 kJ/h
Guaranteed print area
Area excluding top/bottom margins (5 mm) and right and left margins (5 mm)
(When media edge guards are used, right and left margins are 10 mm.)
Power supply voltage
M64s printer: 200 V AC to 240 V AC, 12 A, 50 Hz/60 Hz
External dryer system (heater 1): 220 V AC to 240 V AC, 7 A, 50 Hz/60 Hz
External dryer system (heater 2): 220 V AC to 240 V AC, 7 A, 50 Hz/60 Hz
Input power voltage range
M64s printer: 180 V AC to 260 V AC, 50 Hz/60 Hz ± 1 Hz
External dryer system (heater 1): 220 V AC to 260 V AC, 50 Hz/60 Hz ± 1 Hz
External dryer system (heater 2): 220 V AC to 260 V AC, 50 Hz/60 Hz ± 1 Hz
Power consumption
M64s printer: 2880 W or less
External dryer system: 3390 W or less
External dimensions
3095 mm (W) × 935 mm (D) × 1247 mm (H) ± 10 mm
Mass
M64s printer: 331 kg ± 10 kg
(excluding media and ink)
External dryer system: 67 kg ± 3 kg
Print guaranteed temperature/
humidity
20 to 25°C, 40 to 60% RH (no condensation)
Operating temperature/humidity
15 to 30°C, 30 to 70% RH (no condensation)
Storage temperature/humidity
5 to 35°C, 10 to 80% RH (no condensation)
Installation space
(W) x (D) x (H)
Min. 3900 x 4300 x 2200 mm
Maintenance space
(W) x (D) x (H)
Min. 6100 x 4300 x 2200 mm