Oki ColorPainter M-64S - To Cancel the Drying Operation

48
Printing on reflective sheeting
YY:YY : The remaining time
(min:sec, 10 seconds increment)
DRYING...
REQUIRED TIME YY:YY
The message on the left is displayed during the drying
operation.
PRINTER READY
07: RFLTIV/1219mm
The panel message changes to the message to the left when
the drying operation is complete.
Notes

If the media is not correctly stretched at the end of the
drying operation, immediately stretch the media that
has been rewound.

If the drying operation is canceled while being
performed, the ink may transfer to another page or
peel because it has not dried suciently.
To cancel the drying operation
1
DRYING...
REQUIRED TIME YY:YY
Press the CANCEL button.
2
CANCEL DRYING?
OK/CANCEL
Press the OK button.

Pressing the CANCEL button during this step
resumes the drying operation.
3
CANCELING...
PLEASE WAIT
The printer returns to the online (idle) state
when the drying operation is complete.
Notes

If the media is not correctly stretched at the end of the
drying operation, immediately stretch the media that
has been rewound.

If the drying operation is canceled while being
performed, the ink may transfer to another page or
peel because it has not dried suciently.