Oki ColorPainter M-64S - Sending Data from the Design Tool to the RIP Software

44
Printing on reflective sheeting
Sending data from the design tool to the RIP software
This procedure describes how to print trac signs designed in FlexiPRINT & CUT Authorized 3M Trac Edition for OKI.
1
With the le of the trac sign you want to
print still open, click the RIP and Print icon.
2
In the Preset eld on the top left of the RIP
and Print screen, select the preset name
containing the name of the reective
sheeting you want to use.
Notes

The preset specied here must match the preset selected
in the Default Job Property window of Production
Manager.
If reective sheeting has been newly installed to the
printer or if the type of installed reective sheeting has
been changed, change the preset to match the reective
sheeting preset selected in the Default Job Property
window of Production Manager.
3
Congure the media size, the position and
the other print settings in Layout and the
other panels, and then click Send.
Notes

Do not modify the following parameters.
Output prole/Media/Print mode/Resolution/Color
mode/Dither/Use Color Mapping/Color Adjustment