Oki ColorPainter M-64S - Procedure to Set the Media on the TUR Unit

35
Printing on reflective sheeting
Procedure to set the media on the TUR unit
1
Put the take-up direction switch installed on the right media holder in the o position.
Inner take-up
Winding off
Outer take-up
2
Move the guide bar to the standby position.
3
Hold the front pipe of the TUR unit by the
center and pull the TUR unit toward you.
Before printing
Printing on
reective sheeting
Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix