Oki ColorPainter M-64S - When the Red LED (Alarm) of the Control Box Blinks

78
Troubleshooting
When the red LED (alarm) of the
control box blinks
This LED blinks when an error occurred in the external dryer system.
After turning the control box o, check the connection of the cables between the control box and the heaters, as
well as the connection of the cable between the control box and the printer. Then, turn the control box on again. If
the alarm LED still blinks, the error is related to the hardware or the software and cannot be solved by the operator
(the user).
Contact your dealer or a service representative.