Oki ColorPainter M-64S - Appearance; Main Components and Their Functions; Printer Front (Take-Up Side)

16
Before printing
Appearance / Main components
and their functions
Printer front (take-up side)
External heater head
Contains the heater that dries the reflective
sheeting.
Control box
Controls the external dryer system and the bar type ionizer.
The state (lit, blinking, off) of the LEDs of the control box
indicates the status of the external dryers and the bar type
ionizer.
Green LED: Lit when the external heater or the bar type
ionizer is on. It is also lit when the switch of the heater is
turned on.
Red LED: Blinks when an error occurred.