Oki ColorPainter M-64S - Page 58

Oki ColorPainter M-64S

84 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

58

Maintenance

Procedure in CP_Manager

The following procedure explains how to clean the extra ionizers.

1

Click the Maintenance tab.

2

Click the Extra Ionizers Cleaning button in

the Maintenance tab.

(To step

5

)

Table of Contents

Introduction3
Table of Contents5
Safety Precautions6
Symbol on the Printer6
Manual Legend (Notational Rules)11
Components Delivered with the Printer12
Operating Conditions13
- Installation and Maintenance Space13
- Environmental Conditions14
- Before Printing15
Appearance / Main Components and Their Functions16
- Printer Front (Take-Up Side)16
- Printer Rear (Supply Side)17
- Printer Interior17
To Turn the Control Box on and off18
- Power-On Procedure18
- Power-Off Procedure20
Supported Media21
- Reflective Sheeting21
Precautions and Restriction Regarding the Use of Reflective Sheeting22
- Colored Media22
- Media Not Supporting Automatic Media Identification22
- Supported Media Width22
- Adjustment22
- Printing on Reflective Sheeting23
Loading the Media on the Printer24
- Procedure to Load Roll Media24
- Procedure to Monitor Remaining Media33
- Replacing the Media When the End of the Roll Is Reached33
- Replacing the Media after a Media Jam33
- Setting the Media Remaining Length33
Setting the Media on the Take-Up Reel Unit34
- Procedure to Set the Media on the TUR Unit35
Installing the External Dryer System39
- External Dryer System Installation Procedure39
Printing from the RIP Software40
- Specify the Traffic Colors with the Design Tool40
- Traffic Color Specification Procedure41
- Procedure to Set a Traffic Color to a Target Object42
- Color Trapping/Choking Feature43
- Sending Data from the Design Tool to the RIP Software44
Drying Operation47
- To Cancel the Drying Operation48
Removing the Media49
- Procedure to Print the Amount of Remaining Media49
- Removing the External Dryer System49
- Procedure to Remove the Roll Media (Output Side)50
- Procedure to Remove the Roll Media (Feed Side)52
- Maintenance55
Daily Maintenance56
- Extra Ionizers Maintenance57
- Edge Sensors Cleaning64
- Dust Cover Cleaning66
  - Advanced Operations67
Handle the Media68
- Media Preset Menu68
- Media Registration in Cp_Manager69
Heater Operation of the External Dryer System70
- Display the Control Menu of the External Dryer System70
- External Dryer System Control Information71
- External Dryer System Status71
- External Dryer System Warming State71
- Display in Cp_Manager72
- Troubleshooting73
When an Error Message Is Displayed74
Warning Messages77
When the Red LED (Alarm) of the Control Box Blinks78
- Menu Tree79
- Appendix81
Basic Specifications82
Consumables83

Related product manuals

DP-5000 Metallic and Colour Desktop Printer

Preview: Oki c332

Preview: Oki C931

Preview: Oki C612

Preview: Oki C301

Preview: Oki C650

Preview: Oki C911

Preview: Oki C711

Preview: Oki C310

Preview: Oki C532

Preview: Oki C824