65
Maintenance
8
Sensors for automatic print adjustment
Ionizers
Edge sensors
Clean the surface of the edge sensors with a
cleaning swab.
The edge sensors are located at the back of the sensors for
automatic print adjustment. Rub gently the surface of the
sensors with the cleaning swab to remove the ink mist that
adhered.
Note
Do not put anything on the cleaning swab when
cleaning. Otherwise, it may cause a malfunction of the
sensors.
9
CHECK PRINT HEADS
THEN CLOSE COVERS
Close the maintenance area cover and the
front cover.
10
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
>PH MAINTENANCE
2
SET PH FOR CHECK
Before printing
Printing on
reective sheeting
Maintenance
Advanced
operations
Troubleshooting Menu tree Appendix
To Next Page
Loading...
