Oki ColorPainter M-64S - Page 84

Oki ColorPainter M-64S

84 pages

To Previous Page

To Previous Page

Loading...

47260301EE Rev4

Table of Contents

Introduction3
Table of Contents5
Safety Precautions6
Symbol on the Printer6
Manual Legend (Notational Rules)11
Components Delivered with the Printer12
Operating Conditions13
- Installation and Maintenance Space13
- Environmental Conditions14
- Before Printing15
Appearance / Main Components and Their Functions16
- Printer Front (Take-Up Side)16
- Printer Rear (Supply Side)17
- Printer Interior17
To Turn the Control Box on and off18
- Power-On Procedure18
- Power-Off Procedure20
Supported Media21
- Reflective Sheeting21
Precautions and Restriction Regarding the Use of Reflective Sheeting22
- Colored Media22
- Media Not Supporting Automatic Media Identification22
- Supported Media Width22
- Adjustment22
- Printing on Reflective Sheeting23
Loading the Media on the Printer24
- Procedure to Load Roll Media24
- Procedure to Monitor Remaining Media33
- Replacing the Media When the End of the Roll Is Reached33
- Replacing the Media after a Media Jam33
- Setting the Media Remaining Length33
Setting the Media on the Take-Up Reel Unit34
- Procedure to Set the Media on the TUR Unit35
Installing the External Dryer System39
- External Dryer System Installation Procedure39
Printing from the RIP Software40
- Specify the Traffic Colors with the Design Tool40
- Traffic Color Specification Procedure41
- Procedure to Set a Traffic Color to a Target Object42
- Color Trapping/Choking Feature43
- Sending Data from the Design Tool to the RIP Software44
Drying Operation47
- To Cancel the Drying Operation48
Removing the Media49
- Procedure to Print the Amount of Remaining Media49
- Removing the External Dryer System49
- Procedure to Remove the Roll Media (Output Side)50
- Procedure to Remove the Roll Media (Feed Side)52
- Maintenance55
Daily Maintenance56
- Extra Ionizers Maintenance57
- Edge Sensors Cleaning64
- Dust Cover Cleaning66
  - Advanced Operations67
Handle the Media68
- Media Preset Menu68
- Media Registration in Cp_Manager69
Heater Operation of the External Dryer System70
- Display the Control Menu of the External Dryer System70
- External Dryer System Control Information71
- External Dryer System Status71
- External Dryer System Warming State71
- Display in Cp_Manager72
- Troubleshooting73
When an Error Message Is Displayed74
Warning Messages77
When the Red LED (Alarm) of the Control Box Blinks78
- Menu Tree79
- Appendix81
Basic Specifications82
Consumables83

Related product manuals

DP-5000 Metallic and Colour Desktop Printer

Preview: Oki c332

Preview: Oki C931

Preview: Oki C612

Preview: Oki C301

Preview: Oki C650

Preview: Oki C911

Preview: Oki C711

Preview: Oki C310

Preview: Oki C532

Preview: Oki C824