Oki MC160MFP Maintenance Manual

44292401TH Rev.1
104 /
Oki Data CONFIDENTIAL
ADJUSTMENT/SETTING
SCAN SETTING RESOLUTION P. 118
IMAGE FORMAT P. 118
CODING METHOD P. 118
FILE SIZE P. 118
QUALITY PRIORITY P. 118
DENSITY LEVEL P.119
UTILITY mode
Ref.
page
12.2 MACHINE SETTING
12.2.1 AUTO PANEL RESET
12.2.2 ENERGY SAVE MODE
12.2.3 LCD CONTRAST
12.2.4 KEY SPEED
A. TIME TO START
B. INTERVAL
Function
• Sets the period of time after which the initial screen reappears after the last print job is
received or the last panel key is operated.
Use • To set the period of time by executing auto panel reset.
Setting/
procedure
• The default setting is 1min.
OFF / 30sec / “1min” / 2min / 3min / 4min / 5min
Function
• To specify the time until the machine enters energy save mode after a copy cycle has
been completed or after the last key operation.
Use
Setting/
procedure
• The default setting is 30 min.
5min / 15min / “30min” / 60min
Function • Sets the brightness of the LCD display.
Use • To set the brightness of the LCD display.
Setting/
procedure
• The default setting is .
(LIGHT) -1 / “0” / +1 / +2 (DARK)
Function
• To specify the length of time until the cursor begins to move continuously when a key is
held down.
Use
Setting/
procedure
• The default setting is 1.0sec.
0.1sec / 0.3sec / 0.5sec / “1.0sec” / 1.5sec / 2.0sec / 2.5sec / 3.0sec
Function
• To specify the length of time until the cursor continuously moves between settings or
characters.
Use
Setting/
procedure
• The default setting is 0.1sec.
“0.1sec” / 0.3sec / 0.5sec / 1.0sec / 1.5sec / 2.0sec / 2.5sec / 3.0sec
11.2.3 LCD CONTRAST
11.2.4 KEY SPEED
11.2.2 ENERGY SAVE MODE
11.2 MACHINE SETTING
11.2.1 AUTO PANEL RESET

Oki MC160MFP Specifications

General

Brand	Oki
Model	MC160MFP
Category	All in One Printer
Language	English