MFP Overview > 17
Control panel_oda.jpg
LCD
AND
FUNCTION
AREA
4. Copy Count Indicates the number of copies selected.
5. Copy Mode Used to select Copy mode (also the default working
mode).
6. Send Mode Used to select Send mode.
7. Fax Mode Used to select Fax mode.
8. Additional Settings Used to execute additional settings of “Copy” and
“Send” modes. (The settings are available only for three
minutes. After three minutes, the settings will
automatically return to the default value).
9. Up/Down/Left/Right
Keys
Used to move the cursor in the LCD up/down/left/right.
The up/down keys are used to switch function
indication.
10. OK Used to select and confirm current setting selections.
11. Return Used to cancel selections and go back to the top level of
the setting. The key is also used to cancel any previous
input.
12. FTP Address Used to indicate the stored FTP address for the “Send”
function. This key is only available in the “Send” mode.
13. Address book Used to indicate the stored E-mail addresses for the
Send function.
Also used to indicate the stored Fax numbers for the fax
function. Press once to view speed dial numbers, press
twice to view group dial numbers.
To Next Page
Loading...
Need help?
Printer Specifications
Paper Handling
