Oki MC560n User Manual

A guide to printing > 201
S TEP 1 - G ATHER OR CREATE THE ICC PROFILES
Where can I get the profiles I need?
S TEP 2 - D OWN LOADING ICC PROFILES TO THE HARD DISK
The internal hard disk must be installed in the printer.
You can download profiles to the MFP hard disk using the Profile
Assistant utility.
1. Launch Profile Assistant
2. Select an MFP
If this is the first time you have used Profile Assistant, you
should allow the utility to search for compatible machines.
Select the connection type “Network (TCP/IP)”, and click
Start to begin searching.
If you know the MFP’s IP address, you can enter it
manually.
3. The main screen of Profile Assistant displays the profiles
resident on the selected MFP’s hard disk. To download a
new profile to the MFP:
(a) Click Add.
(b) Select an ICC profile from your computer's hard
disk.
PROFILE
TYPE
WHERE TO GET PROFILES
RGB Source
(RGB Input)
Obtain your RGB source profiles from your scanner, camera
or monitor manufacturer.
CMYK
Simulation
(CMYK input)
Obtain the simulation profile from the manufacturer of the
printer you wish to simulate.
Printer
(CMYK Output)
The factory default profiles for your MFP are built-in. If you
need greater accuracy, you should create your own MFP
profile using third-party ICC profile creation software.
Link Profile You can create Link profiles using third-party ICC profile
creation software.
Note that not all ICC profile creation software can create
Link profiles.

Oki MC560n Specifications

Printer Specifications

print speed (color)	Up to 20 ppm
print speed (black & white)	32 ppm
time to first page (color)	As fast as 11 seconds
time to first page (black & white)	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Copier Specifications

copy speed (color)	Up to 20 cpm
copy speed (black & white)	32 cpm
first copy out (color)	As fast as 23 seconds
first copy out (black & white)	19 seconds
copy resolution	Up to 600 x 600 dpi

Scanner Specifications

scan speed (color)	Up to 10 cpm
scan speed (black & white)	20 cpm
scan resolution	Up to 4800 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	3 seconds/page
fax resolution	Up to 200 x 400 dpi

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Paper Handling

scanner ADF capacity	Up to 50 sheets
paper sizes (main tray)	from 4.1" x 5.8" to 8.5" x 14"
standard printer input	400 sheets
maximum printer input	930 sheets
output capacity	250 sheets face down, 100 sheets face up

Environmental

dimensions (WxDxH)	19.7" x 23.6" x 26.7"
weight	81.6 lb.
power consumption (peak)	1200W
power consumption (standby)	110W
power consumption (normal)	490W