Oki MC560n User Manual

Configuring your machine > 33
NOTE
1. DHCP server: With DHCP (Dynamic Host Configuration
Protocol), a host can automatically be given a unique IP
address each time it connects to a network-making IP
address management an easier task for network
administrators. If the DHCP server is available from your
network, you do not need to enter TCP/IP, subnet mask,
gateway, and DNS information. Instead, this information
will be automatically given for the MFP.
2. IP Address: An IP (Internet Protocol) address uniquely
identifies a host connection to an IP network. System
administrator or network designer assigns the IP
address. The IP address consists of two parts, one
identifying the network and the one identifying your
node. The IP address is usually written as four numbers
separated by periods. Each number can be zero to 255.
For example, 10.1.30.186 could be an IP address.
3. SMTP: (Simple Mail Transfer Protocol) is the main
communication protocol used to send and receive e-mail
on the Internet.
4. DNS: (Domain Name System). The DNS server identifies
hosts via names instead of IP addresses. If the DNS
server is available on your network, you can enter the
domain name instead of digits for your SMTP or POP3
servers, such as Pegasus.com.tw instead of 120.3.2.23.
5. POP3: POP3 is the latest Post Office Protocol 3, this is a
service that stores and serves e-mails for various client
machines that are not connected to the Internet 24 hours
a day. E-mails are held in POP3 until you log on.

Oki MC560n Specifications

Printer Specifications

print speed (color)	Up to 20 ppm
print speed (black & white)	32 ppm
time to first page (color)	As fast as 11 seconds
time to first page (black & white)	8 seconds
print resolution	1200 x 600 dpi
processor speed	500 MHz
duty cycle	60, 000 prints/copies per month

Copier Specifications

copy speed (color)	Up to 20 cpm
copy speed (black & white)	32 cpm
first copy out (color)	As fast as 23 seconds
first copy out (black & white)	19 seconds
copy resolution	Up to 600 x 600 dpi

Scanner Specifications

scan speed (color)	Up to 10 cpm
scan speed (black & white)	20 cpm
scan resolution	Up to 4800 dpi

Fax Specifications

fax modem	33.6 Kbps Super G3
transmission speed	3 seconds/page
fax resolution	Up to 200 x 400 dpi

System Memory

standard imaging RAM	256 MB
maximum imaging RAM	768 MB
optional hard disk drive	40 GB

Paper Handling

scanner ADF capacity	Up to 50 sheets
paper sizes (main tray)	from 4.1" x 5.8" to 8.5" x 14"
standard printer input	400 sheets
maximum printer input	930 sheets
output capacity	250 sheets face down, 100 sheets face up

Environmental

dimensions (WxDxH)	19.7" x 23.6" x 26.7"
weight	81.6 lb.
power consumption (peak)	1200W
power consumption (standby)	110W
power consumption (normal)	490W