Oki MC563 MFP User Manual

- 15 -
2. Setting Up
Install the machine on a flat surface that is wide enough to accommodate the legs of the
machine.
Allow for enough room around the machine as shown in the following figures.
• Top view
• Side view
• Do not install this machine directly on a thick rug or carpet.
• Do not install this machine in a closed room or other locations with bad circulation and
ventilation.
• If you use this machine in a small room continuously for an extended period of time,
make sure to ventilate the room.
• Install this machine away from a source that emits strong magnetic fields or noise.
• Install this machine away from a monitor or television.
• Carry this machine by holding both its sides and slightly slanting its rear side down.
Installation Space

Oki MC563 MFP Specifications

General

Print Technology	LED
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax	Yes
Monthly Duty Cycle	Up to 60, 000 pages
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Print Speed	Up to 30 ppm
Scanner Type	Flatbed, ADF
Copy Speed	Up to 30 cpm
Connectivity	USB, Ethernet
Paper Capacity	250 sheets