To Next Page

To Previous Page

- 23 -

2. Setting Up

Eject the connector from the cover and connect with the wireless LAN module.

Install the wireless LAN module to the machine.

Close the wireless LAN module cover.

Go to "Connecting the Power Code”.

Attaching the wireless module cannot connect the machine to the wireless LAN.

Enable the wireless setting in the steps in "

Connecting to a Wireless LAN (Only When the Wireless LAN Module

is Mounted)

Attach the additional tray unit when increasing the number of sheets or paper to be set is

needed.

Up to 2 trays can be installed.

Set the number of trays on the printer driver after installing them.

Check that the machine is turned off and power cord and all the cables are

unplugged.

Installing the additional tray unit with the machine turned on may cause the machine and additional tray unit to

malfunction.

Installing the Additional Tray Unit

Model Number N36501

Injury may result.

Lift this machine by 2 persons, because it weighs approximately 31 kg.

Questions and Answers:

Need help?

Do you have a question about the Oki MC563 MFP and is the answer not in the manual?

Oki MC563 MFP Specifications

General