To Next Page

To Previous Page

- 45 -

2. Setting Up

Connecting to a Wireless LAN (Only When the Wireless

LAN Module is Mounted)

• Before Connecting to a Wireless LAN

• Enabling Wireless LAN Connection

• Connecting to an Access Point (Infrastructure)

• Connecting to the Machine Directly

• Wireless(Infrastructure) and Wireless(AP Mode) cannot be enabled at the same time.

• If the machine is used in a wireless network environment, the machine does not enter Deep Sleep mode but enters

Sleep mode.

• Do not place any electric products that emit weak radio waves (such as microwaves or digital cordless telephones)

close to the machine.

• The communication speed of a wireless LAN connection may be slower than that of a wired LAN or USB connection

depending on the environment. If you want to print big data such as a photo, it is recommended to print with a wired

LAN or USB connection.

Connecting to an Access Point

Before connecting this machine to a wireless LAN access point, check the following.

Check if your wireless LAN access point matches the following requirements.

Standards: IEEE 802.11 a/b/g/n

Access method: Infrastructure mode

Check if the wireless LAN access point supports WPS.

If it does not support WPS, check the SSID and encryption key by referring to the

instruction manual that is included in the wireless LAN access point or other

documents.

Before Connecting to a Wireless LAN

Questions and Answers:

Need help?

Do you have a question about the Oki MC563 MFP and is the answer not in the manual?

Oki MC563 MFP Specifications

General