To Next Page

To Previous Page

- 17 -

2. Setting Up

Checking the Accessories

Check that you have everything shown below.

Be sure to use the supplied consumables first. If other consumables are used first, the life time may not be shown

correctly or supplied consumables may not be applied.

• Main body

• Four image drums (black, cyan, magenta and yellow)

• Four starter toner cartridges (black, cyan, magenta and yellow)

For the MC model, the starter toner cartridges are installed in the image drums, which are

installed in the machine before shipment.

The starter toner cartridge is not installed in the ES model. Install the toner cartridge that is included in this machine.

Refer to "

Replacing the Image Drum".

• Software DVD-ROM

• Power cord

• Telephone cable

• Envelope lever

The envelope lever is attached to the MP tray. Use the envelope lever if envelopes wrinkle

after being printed.

For instructions, refer to "Printing on Envelopes (Advanced Manual)".

• LAN cables or USB cables are not included in the package. Prepare the cable that suits your connection

environment separately.

• Packaging and cushioning materials are used when transporting the machine. Do not dispose packaging materials

as they may be used in the future.

Injury may result.

Lift this machine by 2 persons, because it weighs approximately 31 kg.

Questions and Answers:

Need help?

Do you have a question about the Oki MC563 MFP and is the answer not in the manual?

Oki MC563 MFP Specifications

General