- 158 -
9. Troubleshooting
The output port of the printer driver is
incorrect.
Select the output port for connecting
the LAN cable or USB cable.
-
The machine is processing data from
another interface.
Wait until printing is complete. -
[Receiving data timeout] is displayed
on the operator panel and the
machine does not print.
Press the (SETTING) button
on the operator panel, select [Admin
Setup] > [Print Setup] > [Print menu]
> [Printer Adjust] > [Timeout Injob],
and then select a longer time. The
factory default setting is 40 seconds.
If the job is not printed with "Received
invalid data" displayed, the selected
emulation language may not match
this machine (model). Make sure that
the printer driver you use supports
this model of the machine.
-
Cause Solution Reference
To Next Page
Loading...
