EasyManuals Logo

Oki MC563 MFP User Manual

Oki MC563 MFP
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
- 50 -
2. Setting Up
12
Press the button repeatedly to select [Wireless Network Selection] and
press the (OK) button.
The machine starts searching for wireless LAN access points. Wait for a while.
13
Press the button to select [Manual Setup], and then press the button.
14
Check that the SSID entry screen is displayed and press the button. Use
the , , , or button to enter the SSID, select [Done] at the end, and
then press the (OK) button.
15
Select the encryption method that you checked in step 1, and then press the
(OK) button.
The encryption key varies depending on the wireless LAN access point or security.
16
The procedure depends on the encryption method you selected in step 15.
If you selected [WPA/WPA2-PSK], select [TKIP/AES], and then press the (OK)
button. Enter the Pre-shared Key, select [Done] at the end, and then press the (OK)
button.
If you selected [WPA2-PSK], select [AES], and then press the (OK) button. Enter
the Pre-shared Key, select [Done] at the end, and then press the (OK) button.
If you selected [WEP], enter the WEP Key, and then press the (OK) button.
17
If the displayed content is the same as that you checked in step 1, select [Yes]
and then press the (OK) button.
It takes approximately 30 seconds for the machine to detect the wireless LAN access point.
When the screen indicates that connection is established, press [OK].
If the screen indicates that connection failed, press [OK] and go back to step 5.
18
If the antenna mark is displayed at the top right of the home screen, the
connection is established correctly.
The antenna mark may not be displayed on some screens such as the copy top screen.
If the wireless LAN connection is unstable
If the wireless LAN connection is unstable, read the cautions in "
Before Connecting
to a Wireless LAN
", and then change the positions of the machine and wireless
LAN access point. If you cannot find a solution even after reading the cautions,
bring the machine and the wireless LAN access point close to each other.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MC563 MFP and is the answer not in the manual?

Oki MC563 MFP Specifications

General IconGeneral
Print TechnologyLED
Print Resolution1200 x 1200 dpi
Scan ResolutionUp to 600 x 600 dpi
FaxYes
Monthly Duty CycleUp to 60, 000 pages
FunctionsPrint, Copy, Scan, Fax
Duplex PrintingYes
Print SpeedUp to 30 ppm
Scanner TypeFlatbed, ADF
Copy SpeedUp to 30 cpm
ConnectivityUSB, Ethernet
Paper Capacity250 sheets

Related product manuals