Oki MC563 MFP User Manual

- 52 -
2. Setting Up
If the "Do you want to Set-up wireless?" message appears, press the button to select [No (Do not show next
time)], and then press the (OK) button.
2
Press the (SETTING) button.
3
Press the button once to select [Admin Setup] and press the button.
4
Enter the administrator password on the administrator password entry screen,
and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is
changed, enter the updated password.
5
Press the or button repeatedly to select [Network Menu] and press the
button.
6
Check that [Network Setting] is selected, and then press the button.
7
Press the button repeatedly to select [Wireless(AP Mode) Setting] and
press the button.
8
Check that the screen displays the "Cannot be used simultaneously with
wireless (infrastructure)." message for several seconds and [Enable] is
selected on the [Please enable/disable wireless (AP mode)] screen. Press the
(OK) button.
9
Press the button to select [Manual Setup] on the [Please set wireless (AP
mode)] screen, and then press the button.
10
Check the [SSID] and [Password] of the machine.
11
Enter the [SSID] and [Password] that you checked in step 10 to connect the
machine and your wireless device.
12
Press the button repeatedly until the top screen is displayed.

Oki MC563 MFP Specifications

General

Print Technology	LED
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax	Yes
Monthly Duty Cycle	Up to 60, 000 pages
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Print Speed	Up to 30 ppm
Scanner Type	Flatbed, ADF
Copy Speed	Up to 30 cpm
Connectivity	USB, Ethernet
Paper Capacity	250 sheets