- 174 -
10. Operating Management/Specifications
Saving Power Consumption with the Power Save
Function
The machine has three Power Save modes: Power Save, Sleep, and Deep Sleep.
In Power Save mode, the display screen turns off and the power saving indicator lights up or
blinks.
Press the (POWER SAVE) button to enter Power Save mode.
After being left unoperated for a certain period of time (a minute by factory default), the
machine automatically enters Power Save mode.
After being left unoperated for a certain period of time (15 minutes by factory default) in
Power Save mode, the machine enters Sleep mode, Deep Sleep mode.
• For details on how to change the idle time before entering Power Save mode, see "Setting the Length of Idle Time
Before Entering Power Save Mode".
• For details on how to change the idle time before entering Sleep mode, see "Setting the Length of Idle Time Before
Entering Sleep Mode".
Press the (POWER SAVE) button to recover from Power Save mode. The machine also
recovers from Power Save mode, when some data is received from a computer or another
device, or a document is set.
• Setting the Length of Idle Time Before Entering Power Save Mode
• Setting the Length of Idle Time Before Entering Sleep Mode
• Restrictions in Power Saving Function
• Automatically Turning the Machine Off (Auto Power Off)
• Setting the Length of Idle Time Before Auto Power Off Works
1
Press the (SETTING) button on the operator panel.
2
Press the button to select [Admin Setup] and press the (OK) button.
3
Enter the administrator password.
The factory default administrator name and password are "admin" and "999999" respectively.
4
Select [Enter], and then press the (OK) button.
5
Press or several times and press [Manage Unit].
6
Press [Power Save].
7
Press [Power Save Time].
8
Select transition time.
Setting the Length of Idle Time Before Entering Power Save
Mode
To Next Page
Loading...
Need help?
General
