Oki MC563 User Manual

- 45 -
2. Setting Up
Connecting to a Wireless LAN
• Before Connecting to a Wireless LAN
• Enabling Wireless LAN Connection
• Connecting to an Access Point (Infrastructure)
• Connecting to the Machine Directly
• Wireless(Infrastructure) and Wireless(AP Mode) cannot be enabled at the same time.
• If the machine is used in a wireless network environment, the machine does not enter Deep Sleep mode but enters
Sleep mode.
• Do not place any electric products that emit weak radio waves (such as microwaves or digital cordless telephones)
close to the machine.
• The communication speed of a wireless LAN connection may be slower than that of a wired LAN or USB connection
depending on the environment. If you want to print big data such as a photo, it is recommended to print with a wired
LAN or USB connection.
Connecting to an Access Point
Before connecting this machine to a wireless LAN access point, check the following.
1
Check if your wireless LAN access point matches the following requirements.
Standards: IEEE 802.11 a/b/g/n
Access method: Infrastructure mode
2
Check if the wireless LAN access point supports WPS.
If it does not support WPS, check the SSID and encryption key by referring to the
instruction manual that is included in the wireless LAN access point or other
documents.
Before Connecting to a Wireless LAN

Oki MC563 Specifications

General

Print Technology	LED
Print Resolution	1200 x 1200 dpi
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Functions	Print, Copy, Scan, Fax
Copy Speed (Black)	30 cpm
Copy Speed (Color)	30 cpm
Copy Resolution	600 x 600 dpi
Scan Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Fax Modem Speed	33.6 kbps
Paper Capacity	250 sheets
Maximum Paper Size	A4
Duplex Printing	Yes
Automatic Document Feeder (ADF)	50 sheets
Weight	29 kg
Fax Transmission Speed	3 seconds per page
Connectivity	USB, Ethernet, Wireless
Mobile Printing	AirPrint, Google Cloud Print
Operating System Compatibility	Windows, macOS
Monthly Duty Cycle	60, 000 pages