- 43 -
2. Setting Up
Set the administrator password using from 6 to 12 alphanumeric characters. Be careful not to
forget the set password.
1
Press the (SETTING) button.
2
Press the button to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999".
4
Press the or button repeatedly to select [Manage Unit] and press the
button.
5
Press the or button to select [Admin Password] and press the
button.
6
Enter a new password, and then press the (OK) button.
7
Enter the password again to confirm, and then press the (OK) button.
8
Press the (Back) button until the top screen is displayed.
Set up the date and time, fax function, network, and E-mail. You can skip unnecessary
settings.
1
Check that the wiring has correctly been finished.
2
Press the (SETTING) button.
3
Press the or button repeatedly to select [Easy Setup] and press the
button.
4
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
5
Check that [1. Date/Time Setting] is selected, and then press the button.
6
Press the or button to select the Time Zone you want to set and press
the button.
7
When the daylight saving setting screen is displayed, press the or
button to select a setting suitable to your environment and press the
button.
8
Check that [Manual] is selected on the [Please select way to set Day and
Time] screen, and then press the button.
9
Press the or button to set [Day] and press the button. Press the
or button to set [Month] when the cursor has moved, and then press the
button. Press the or button to set [Year] and press the (OK)
button.
10
Set the time in the same manner.
11
[Date/Time Setting was completed] is displayed for several seconds and the
screen returns to the [Setup Menu] screen.
Setting the Administrator Password Easy Setup
To Next Page
Loading...
Need help?
General
