ML1120/ML1190 User’s Guide - Getting started > 13
2. Connect the power cable (1) to the power connector (2) on the
printer.
3. Connect the power cable to a 220/240 V AC power outlet and
switch on the outlet power.
4. Turn the printer Power Switch to ON.
5. Check that the SEL and STATUS indicators on the control panel
illuminate.
ProduciNg a test PriNt
To check that your printer is operational, produce a test print on a sheet
of 80 gsm A4 paper (for example) as follows:
CAUTION!
Allow at least 5 seconds between turning the printer ON after
turning it OFF. A shorter time interval between turning ON/OFF
operations may cause printer power failure.
Do not turn the printer OFF while it is printing as this may
result in damage to the print head.
To Next Page
Loading...
Need help?
General
