ML1120/ML1190 User’s Guide - Operating instructions > 48
meNu settiNg
NOTE
Before changing menu settings, you may wish to print the current
menu settings as in "Conrmingcurrentsettings"onpage47.
Set menu item values (printed out for reference as you proceed) as
follows:
1. Press SEL and switch the printer ON to activate Menu mode.
2. Press SEL button (or TEAR and SEL button together) to step
forward (backward) through the menu groups to the required
group.
3. Press LF/FF button (or TEAR and LF/FF button together) to step
forward (backward) through the menu items to the required item.
4. To change the setting for a selected item, press LOAD/EJECT
(or TEAR and LOAD/EJECT button together) through the setting
values to the required setting.
5. Repeat steps 2 and 3 as required to change settings for other
items.
6. To exit menu setting, press LOAD EJECT continuously while
pressing TEAR and press LF/FF to save the new settings and
exit menu setting mode.
NOTE
Switching the printer OFF does not save the new settings.
To Next Page
Loading...
