ML1120/ML1190 User’s Guide - Paper handling > 31
teariNg off coNtiNuous forms
1. With the SEL indicator illuminated, press and hold the LF/FF
button to move the continuous form to the next page.
2. Press TEAR to align the tear-off perforations on the form with the
paper cutter on the printer.
3. Carefully tear off the forms along the tear-off perforations using
the paper cutter as a guide. Using excessive force may result in
tearing at a position other than the tear-off perforations.
4. Press the TEAR button to reposition the continuous forms in the
printer back to the first line print position.
aligNiNg the tear-off PerforatioNs
If the tear-off perforations are not aligned with the paper cutter, align
them as follows:
1. Remove the Top Cover of your printer.
2. With the SEL indicator illuminated, press and hold the TEAR
button to move the tear-off perforations to the paper cutter.
3. Check the position of the tear-off perforations (1) relative to the
paper cutter (2).
(a) To advance the forms, continue to hold down the TEAR
button and then the SEL button.
To Next Page
Loading...
