ML1120/ML1190 User’s Guide - Operating instructions > 51
MENU ITEM FUNCTION SETTING
Rear feed menu Continuous paper
top of form
Select the reference
position for the TOF
position when auto loading
continuous form paper
from the rear of the printer.
(Up to the mid-section of
characters in the first line.)
2.12 mm (1/12 )
4.23 mm (1/6 )
6.35 mm (1/4 )
8.47 mm (1/3 )
10.58 mm (5/12 )
12.70 mm (1/2 )
14.82 mm (7/12 )
16.93 mm (2/3 )
19.05 mm (3/4 )
21.17 mm (5/6 )
23.28 mm (11/12 )
25.40 mm (1 )
27.52 mm (13/12 )
Use top of form
Bottom feed
menu
Line Spacing Select line feed pitch.
6 LPI
8 LPI
Skip Over
Perforation
Select whether to skip over
perforation or not. (When a
skip over perforation setup
command is received, the
received command is given
priority.)
25.4 mm(1 )
No
Page Length Select the length of a
continuous form.
279.4 mm(11 )
296.3 mm(11 2/3 )
304.8 mm (12 )
355.6 mm(14 )
431.8 mm(17 )
76.2 mm(3 )
82.6 mm(3.25 )
84.7 mm(10/3 )
88.9 mm(3.5 )
93.1 mm(11/3 )
101.6 mm(4 )
127.0 mm(5 )
139.7 mm(5.5 )
152.4 mm(6 )
177.8 mm(7 )
203.2 mm(8 )
215.9 mm(8.5 )
To Next Page
Loading...
Need help?
General
