Getting started > 11
3. Connect the power cable to a 220/240 V A/C power outlet (3a) and switch on the
outlet power (3b).
4. Turn the printer power switch ON.
5. Check that the power indicator on the control panel illuminates.
P
OWERING
OFF
YOUR
PRINTER
1. Turn the printer Power Switch to OFF.
2. Switch off the outlet power (1a) and then unplug from the power outlet (1b).
3. Unplug the power cable connector (2) from the printer (3).
WARNING!
Be careful when inserting a three-pronged AC plug. Before
plugging it in, check the position of the FG terminal. Incorrect
insertion may cause damage not only to the printer main body but
also peripheral devices and electric shock, smoke and ignition.
2
1b
1a
3
To Next Page
Loading...
